A 2D discrete heat transfer model considering the thermal resistance effect of fractures for simulating the thermal cracking of brittle materials

Acta Geotechnica - A concise, two-dimensional discrete heat transfer model is presented, which considers the thermal resistance effects of cracks. The discrete heat transfer model discretizes the...     

Orbital control on cyclical organic matter accumulation in Early Silurian Longmaxi Formation shales

High resolution(939 samples)total organic carbon content(TOC)analyses were conducted on the Shuanghe Section of^152.6 m in the Changning area,Sichuan Basin.The sampling section was divided into two units considering the distinct-different deposit environment and sediments accumulation rate.The lower part(Unit 1)and the peer part(Unit 2)with high resolution sample spacing(0.08–0.4 m)enables the identification of the precession cycle in two sedimentary sequences with distinct different sedimentary accumulation rate.MTM Power spectral analyses on untuned TOC series reveals significant peaks exceeding above the 95%confidence level and shows that both Unit 1 and Unit 2 have recorded Milankovitch cycles of 405 kyr long eccentricity,short eccentricity,obliquity and precession.The floating astronomical time scale(ATS)was constructed on the Shuanghe Section in the Early Silurian(~439.673–444.681 Ma),and which was calibrated by 405 kyr long eccentricity cycles.The total duration of the Wufeng and Longmaxi shales is 5.01 Myr.The floating ATS used for estimating the duration of the graptolite zones and each stage in the study interval.Finally,we postulated two models that could verify the linkage between orbital cycle and organic accumulation.To make sure whether productivity or preservation is the main factor that under long eccentricity control,the phase correlation between the obtained filtered signal and the theoretical orbital solution should be made clear in the further research.     

Adsorption Mechanism and Kinetic Characterization of Bituminous Coal under High Temperatures and Pressures in the Linxing-Shenfu Area

The majority of coalbed methane(CBM) in coal reservoirs is in adsorption states in coal matrix pores. To reveal the adsorption behavior of bituminous coal under high-temperature and high-pressure conditions and to discuss the microscopic control mechanism affecting the adsorption characteristics, isothermal adsorption experiments under hightemperature and high-pressure conditions, low-temperature liquid nitrogen adsorption-desorption experiments and CO2 adsorption experiments were performed on coal samples. Results show that the adsorption capacity of coal is comprehensively controlled by the maximum vitrinite reflectance(Ro, max), as well as temperature and pressure conditions. As the vitrinite reflectance increases, the adsorption capacity of coal increases. At low pressures, the pressure has a significant effect on the positive effect of adsorption, but the effect of temperature is relatively weak. As the pressure increases, the effect of temperature on the negative effect of adsorption gradually becomes apparent, and the influence of pressure gradually decreases. Considering pore volumes of pores with diameters of 1.7-100 nm, the peak volume of pores with diameters 10-100 nm is higher than that from pores with diameters 1.7-10 nm, especially for pores with diameters of 40-60 nm, indicating that pores with diameters of 10-100 nm are the main contributors to the pore volume. The pore specific surface area shows multiple peaks, and the peak value appears for pore diameters of 2-3 nm, indicating that this pore diameter is the main contributor to the specific surface area. For pore diameters of 0.489-1.083 nm, the pore size distribution is bimodal, with peak values at 0.56-0.62 nm and 0.82-0.88 nm. The adsorption capability of the coal reservoir depends on the development degree of the supermicroporous specific surface area, because the supermicroporous pores are the main contributors to the specific pore area. Additionally, the adsorption space increases as the adsorption equilibrium pressure increases. Under the same pressure, as the maximum vitrinite reflectance increases, the adsorption space increases. In addition, the cumulative reduction in the surface free energy increases as the maximum vitrinite reflectance increases. Furthermore, as the pressure increases, the surface free energy of each pressure point gradually decreases, indicating that as the pressure increases, it is increasingly difficult to adsorb methane molecules.     

南海北部陆坡西部海域“海马”冷泉甲烷渗漏及其海底表征

2015年3月"海马"号遥控无人潜水器(ROV)在南海北部陆坡西部海域首次发现活动冷泉,并命名为"海马"冷泉,此后中国地质调查局广州海洋地质调查局先后组织了3个航次,对"海马"冷泉开展进一步勘查和研究。本次研究在综合分析4个航次调查数据的基础上,初步阐述"海马"冷泉的分布范围、地形地貌、生物群落、自生碳酸盐岩和流体活动等特征。总体而言,"海马"冷泉区地势平缓,气体渗漏现象非常发育,是以CH4为主要气体渗漏形成的活动冷泉区,且气体渗漏活动具有时空迁移性。气体碳同位素组成表明,海马冷泉区的CH4为混合成因气,且以微生物成因为主;"海马"冷泉区发育有多种类型的化能自养冷泉生物群落,冷泉区种类丰富,目前已报道了多个冷泉生物新种。这些发现为研究南海北部陆坡西部海域天然气水合物分解及其环境效应、冷泉生物生命起源与演化和南海与印度洋及太平洋物种迁移贯通等科学问题提供重要依据。     

延迟交联凝胶研制及其在广西某铀矿堵漏应用

针对地质钻探小井眼条件下失返性漏失堵漏技术难题，开展了适用于地质钻探堵漏要求的聚合物交联凝胶研究。采用单因素优选法，优选了交联凝胶体系用各种处理剂，并以环保型植物胶GJ为成胶剂，加入交联控制剂N1及交联剂1号等组分，研制了一种延迟交联凝胶。该凝胶在广西某铀矿勘查ZK6-37-1孔堵漏成功应用，解决了2个孔段失返性漏失问题。研究结果表明，该凝胶具有交联时间可控(交联时间10～75 min)以及较高的凝胶强度（承压≥6 MPa），在解决失返性漏失方面具有广阔的应用前景。     

不同结构林带防风效能风洞模拟

防风林带结构是影响防风效能的主要因素。建立不同宽度、不同株行距林带防风效能与林带后距离之间的统计模型，可以为防风林建设提供指导性意见。通过风洞实验，在11 m·s^-1风速下，对4种宽度、5种株行距林带的背风面0~10H（H为林带高度）的风速进行测定，采用曲线参数估计法、傅立叶模型、SSF模型（Sum of Sin Functions），构建了不同结构林带防风效能与林带后距离间的统计模型。结果表明：傅立叶模型拟合不同宽度林带的防风效能与林带后距离的关系效果最优，可决系数（R²）均在98%以上；SSF模型拟合不同株行距林带的防风效能与林带后距离的关系效果最优（R²>0.98）。根据构建的统计模型，风速为11 m·s^-1左右时，林带宽度8 m（两行一带）的防风林的防风效能存在明显优势；5种株行距的林带中，株行距为8 m×8 m的防风林带本试验条件下防风效果最好。     

Analog simulation of urban construction land supply and demand in Chang-Zhu-Tan Urban Agglomeration based on land intensive use

Journal of Geographical Sciences - Urban land intensive use is an important indicator in harmonizing the relationship between land supply and demand. The system dynamics (SD) can be used to...     

车辆碾压作用下戈壁地表起尘浓度

通过野外观测车辆碾压作用下戈壁地表PM₁₀释放浓度，探讨其主要影响因素。针对戈壁区砾石、砂砾、砂质和砂土4种路面类型，应用TSI粉尘仪多次重复观测车辆碾压产生的PM₁₀浓度，进而阐明碾压次数、车速和地表水分等因素对起尘浓度的影响。结果表明：4种路面的平均起尘浓度依次为5.339、9.089、16.944、50.251 mg·m^-3，是自然状态下的5~50倍；起尘浓度随碾压次数增多而增大，其中砂土路情况下的增长最显著；随土层厚度的增大呈现出幂函数的增长趋势；降雨后路面起尘浓度显著减小，且降雨量会影响降雨后起尘浓度的变化趋势。最后提出了针对性的建议和措施以减弱车辆碾压导致的戈壁地表起尘。     

唐山地区波速比变化特征研究

选取唐山地区2008~2018年震相数据，利用单台多震和达法和多台多震和达法分别计算波速比，结合研究区内的地震活动对波速比的变化特征进行研究。结果显示，多台多震和达法得到的波速比结果较为稳定，而单台多震和达法得到的结果变化幅度大，显示更多细节；唐山地区ML≥4.5地震发生前单台波速比存在不同程度的异常，异常台站的方位与地震具有一定的对应性。     

基于均一化观测序列的成山头海表温度气候变化特征分析

文中利用加拿大环境部气候研究中心研发的惩罚最大t检验方法,选取均一的邻近气象站为参考站,结合元数据信息,对1960-2017年成山头海洋站海表温度序列进行了均一性检验与订正。利用订正后的海表温度序列对成山头海温气候变化特征进行分析。结果表明,订正前后年平均海表温度趋势发生了明显改变,表现出海温上升趋势较订正前加强的特征,增暖趋势由订正前的0.04℃/10 a上升到0.15℃/10 a,其中最暖的5个年份多发生在1980年以后,分别为1973年、1989年、2002年、2007年和2017年。海表温度总体呈显著上升趋势和明显的年代际波动,20世纪60年代至80年代末为偏冷阶段,之后开始增暖,20世纪90年代至今为偏暖阶段。1960-2017年,成山头的海温突变点在1987年,是一次增暖性突变,与中国大陆的气温突变特征和气温变化阶段性特征非常一致。